Set the photo to 4 × 6 in (101.6 × 152.4 mm) in PrintExactly, choose the Page that matches the loaded paper, confirm Scale to Fit is off and Scale is 100%, then print. For other picture dimensions, see the exact-dimensions guide; for several photos on one sheet, see the multiple-photo workflow.

The 3-step method

  1. Set the Photo Frame to 4 × 6 in (101.6 × 152.4 mm). Open PrintExactly and type 4 in × 6 in, or 101.6 × 152.4 mm, as the Frame dimensions. This is a standard North American photo size.
  2. Place one or many copies on the sheet. Place the Frame only where the selected printable area accommodates its full size and any finishing footprint or margins. For multiple copies, set the copy count, use Fill Page, or run Auto Arrange.
  3. Confirm 100% scale and the printable area, then print. Turn off Scale to Fit in the macOS print panel, set Scale to 100%, and confirm the printable area shows the full 4 × 6. Send the job.

Print 4 × 6 regularly? Save the Page setup and Frame dimensions as a 4 × 6 layout preset for your next photo. Presets store Page setup and Frame geometry, not photos or Content adjustments.

Why a 4 × 6 photo prints the wrong size on Mac

  • Paper mismatch can change the output. If the document Page and loaded paper do not match, the driver may scale or clip the photo depending on its settings. Match the Page to the loaded paper, then review Scale to Fit and other scale controls in the print panel.
  • Borderless mode can affect dimensions. Borderless behavior varies by printer driver and may affect printed dimensions. Use bordered paper when exact-size output matters.

Paper layouts for 4 × 6 photos

Choose the Page first. Page controls choose the printer, paper, and orientation and set the area you review; it does not edit the driver's printable area. PrintExactly reads the printable area that the selected driver reports for that paper. If a driver reports none, PrintExactly uses unverified fallback margins that are not a measurement of your printer. Each 4 × 6 Frame must fit inside that area, including any margins, bleed, or cut marks. Choose Frame to change the selected photo's size or finishing, which applies to the selected Frame or group only. For a scrapbook page or a sheet that mixes sizes with bleed and crop marks, see mixed-size layouts. To plan a sheet before printing, use the photo print size calculator; for bleed and crop marks, see the bleed and crop marks guide.

  • Landscape 4 × 6 Frame (152.4 × 101.6 mm). One landscape Frame has this bare size on a Letter or A4 Page; the printable area and any finishing footprint still decide the fit.
  • Two stacked landscape Frames (152.4 × 203.2 mm). Two landscape 4 × 6 Frames stacked vertically measure 152.4 × 203.2 mm bare. That is smaller than Letter (215.9 × 279.4 mm) or A4 (210 × 297 mm), but it is not a guaranteed fit once margins and marks are added.
  • Letter or A4 Page. Letter is 215.9 × 279.4 mm and A4 is 210 × 297 mm. Use the printable area shown for the selected paper, not the paper size alone.

Measure a 4 × 6 test print

  1. Choose the Page that matches the loaded paper, then select the 4 × 6 Frame and confirm it reads 101.6 × 152.4 mm.
  2. Check the per-item effective DPI, then print one test at 100% with Scale to Fit off.
  3. Measure with a ruler. Expect 101.6 × 152.4 mm. If the measurement differs, check the print settings before printing a batch.

Frequently asked questions

How big is 4 × 6 in millimeters?

4 × 6 inches = 101.6 × 152.4 mm exactly. PrintExactly accepts these dimensions.

Can I print multiple 4 × 6 photos on one Mac page?

Yes. Set the copy count for the 4 × 6 item, add other sizes, and PrintExactly packs them on a single sheet or across multiple sheets.

Does a 4 × 6 layout fit on Letter or A4 paper?

Not guaranteed. One landscape 4 × 6 Frame measures 152.4 × 101.6 mm, and two stacked landscape Frames measure 152.4 × 203.2 mm. Both are smaller than Letter (215.9 × 279.4 mm) and A4 (210 × 297 mm), but the printer's printable area must also hold any margins, bleed, or cut marks.