Set the photo to 8 × 10 in (203.2 × 254 mm) in PrintExactly, place it on Letter or A4 portrait, review available fit and scale controls (which vary by macOS version and driver), then measure a test print before a batch.
The 3-step method
- Set the Photo Frame to 8 × 10 in (203.2 × 254 mm). Open PrintExactly and type 8 in × 10 in, or 203.2 × 254 mm, as the Frame dimensions. This is the standard portrait-print size and the most common physical frame insert above 4 × 6.
- Place on Letter or A4 portrait. Use Letter or A4 portrait only if the printable area accommodates the full Frame plus any finishing footprint. Smaller prints may require extra Pages.
- Verify printable area and 100% scale, then print. Set Scale to 100% and turn off Scale to Fit where available (controls vary by macOS version and driver). Confirm the printable area shows the full 8 × 10 Frame, then measure a test print before a batch.
If you print 8 × 10s repeatedly, save the Page setup and Frame dimensions as an 8 × 10 repeat-print preset. It keeps Page setup and Frame geometry, not photos or Content adjustments.
Why an 8 × 10 photo prints the wrong size on Mac
- Borderless expansion. Some borderless drivers enlarge output to reach the paper edge; the amount depends on driver settings. Measure a test sheet when dimensions matter. Bordered media avoids this expansion but does not guarantee exact physical output.
- Photo paper preset scaling. Glossy photo paper presets in some drivers apply their own scaling. Open the driver's preferences and set Fit to Off or 100%.
Frequently asked questions
How big is 8 × 10 in millimeters?
8 × 10 inches = 203.2 × 254 mm. 203 mm is a rounded value; use 203.2 × 254 mm for the exact conversion.
Can I print an 8 × 10 with smaller reference prints on one sheet?
Possibly. PrintExactly packs items within the printable area, including any finishing footprint; an 8 × 10 plus smaller reference prints may require additional Pages.
Print a photo at exact size on Mac · Full exact-size Mac guide